BlackVue Cellink-Neo 6 Dash Cam External Battery Supply.
BlackVue Cellink-Neo 6 Dash Cam External Battery Supply.
(Only used a couple of times when getting Car serviced once a year.)
Description:
Power your dash cam worry-free with the BlackVue Cellink-Neo 6 Slim 6000 mAh Dash Cam Parking Mode Battery protection with smart app connectivity. With up to 30 hours of power and ultra-safe LiFePO4 technology, it’s the perfect solution for hybrid, electric, and traditional vehicles alike.
Key Features
High Capacity Power for up to 30 hours (1CH) or 20 hours (2CH) of recording
Check battery status wirelessly via the BlackVue app
Works with a wide range of vehicles, including trucks and electric cars
Power additional devices on the go
Real-time capacity info at a glance
Lithium Iron Phosphate cell technology for enhanced durability and thermal stability
Aluminum casing for efficient heat dissipation and easy under-seat installation.
The Cellink NEO 6 Slim External Battery Pack is a compact and reliable power solution designed specifically for Parking Mode dash cam setups. With a slimmer profile and efficient lithium iron phosphate (LiFePO4) battery technology, it provides extended recording times without draining your car battery.
The Cellink NEO 6 Slim can deliver up to 20 hours of continuous power for a 2-channel dash cam and up to 30 hours for a single-channel dash cam. These estimates may vary depending on the camera model and settings.
Since most Parking Mode dash cams only record when motion or impact is detected, actual usage time is often even longer than the rated continuous times.
The system charges while your vehicle is running—either via the cigarette lighter socket or hardwired to the fusebox. Once the engine is off, the fully charged NEO 6 Slim automatically takes over and powers your dash cam, ensuring uninterrupted Parking Mode recording without draining your car battery.
Hardwiring to the fusebox allows for faster charging in approximately 60 minutes. Alternatively, if you prefer a plug-and-play setup, charging through the cigarette lighter socket takes about 80 minutes.
The Cellink NEO 6 Slim is suitable for use in 12V vehicle systems only.
*Not compatible with 24V systems such as trucks or commercial vehicles.
Important Notes:
1. When charging the Cellink NEO 6 Slim via your cigarette lighter socket, make sure the input switch is set to FIX.
Once connected to the cigarette lighter socket and operating, never switch to ADJ. Doing so may cause functional issues, overheating, or even damage to the ignition and wiring.
2. If hardwiring to a fusebox, set the power switch to ADJ.
3. This product is not compatible with 24V electrical systems.
4. When using with dash cams such as Lukas, BlackSys, FineVu or BlackVue X Series, ensure the 3-wire output cable is connected properly. This enables correct Parking Mode activation and deactivation.
What’s in the box?
Cellink NEO 6 Slim battery pack
2 x Charging cables – one hardwire input cable and one cigarette lighter adapter (12V male)
2 x Output cables – one female cigarette lighter socket and one 3-wire cable for hardwired dash cams
User manual
Velcro mounting strips
Fuse taps – recommended to be installed by a qualified auto electrician (use a fuse slot that cuts power when the ignition is off)